Canon VB-C60 Operation Manual page 178

List of Log Messages
B102 Client connection denied [notice]
Description %1 request denied[%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Client connection was denied due to an authentication error (41),
insufficient resource (43), specification of unsupported codec (45),
Meaning
specification of unsupported stream (46), host access restriction (48), too
many clients (49) or invalid operation mode (4a).
41: Check the user name, password or user list used for connection, 43:
Reconnect or reboot the camera, 45 or 46: Use supported client software,
Countermeasure 48: Check the host access restriction, 49: Check the maximum number of
clients that can be connected, 4a: Check the applicable settings to see if
the audio server is used.
B103 Client forcibly disconnected [notice]
Description %1 access denied[%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 48 | 4a)
Connection was initially permitted, but the setting has subsequently been
Meaning changed to prohibit access, thereby triggering a forced disconnection (the
denial type is the same with B102).
B301 Audio sending device error [err]
Description cannot use audio device for tx[%1:%2] (B301)
%1 Error handling (ld | buff)
%2 Error number
Meaning An audio device error was detected.
Countermeasure If the error is not reset automatically, arrange for servicing.
B401 Audio device initialization failed [crit]
Description audio device initialization error[%1] (B401)
%1 Error number
Meaning The audio device could not be initialized. The audio server stops.
If the problem persists after rebooting, the camera is faulty. Arrange for
Countermeasure
servicing.
5-14