Setting The Camera Control And External Device Name (Camera) - Canon VB-C60 Operation Manual

Setting the Camera Control and External Device
Name (Camera)
You can set the following items.
Camera Name
Enter the name of the camera. The camera name is required if VK-64, etc., is used
with the camera.
Initial Camera Settings
Set the AE mode, slow shutter, shutter speed and focus mode.
Camera Control
Set the digital zoom and image stabilizer.
Day/Night
Set the Day/Night switching mode.
Installation Conditions
Set whether or not you will use a dome, the LED setting, and the mounting method.
Camera Position Control
Set whether or not to limit the camera's pan/tilt/zoom operations to the preset
positions registered beforehand. Also, set the operation to be performed when
control privileges are not requested.
External Device Name
Set the external input device name and external output device name.
General
[Camera Name]
Be sure to enter the camera name into [Camera Name (alphanumeric characters)].
Up to 15 ASCII characters (spaces or printable characters) can be used for the [Camera
Name (alphanumeric characters)].
Tip
If you are using the optional recording software (VK-64/VK-16 or bundled VK-Lite), the
camera name set here will be shown when the camera is registered.
1-14