Canon VB-C60 Operation Manual page 48

Setting the Image Server, Audio Server and HTTP Server (Server)
Switch [Line In] and [Microphone In] on each setting page according to the
specification of the microphone (
If a wrong input is used, the camera or microphone may be damaged. Be sure to
set the correct input.
Note
The volume, sound quality, etc., may change depending on the characteristics of the
microphone used.
To output audio from the audio output terminal of the camera, send audio from VK-Lite
Viewer. Audio cannot be sent from VB-C60 Viewer See "Audio Transmission/Reception
(Two-way Communication)" in VK-Lite Viewer ( Start Guide).
Connect a speaker with an amplifier to the camera. See "Audio Input/Output Terminals" ( Start
Guide).
If [Enable] is selected under [Echo Canceller], the sound quality or volume may be
affected. Utilize this function as necessary according to the installation environment and
how the camera is used.
To transmit audio, read "Notes" in "Audio Input/Output Terminals" of Start Guide carefully.
1-32
• Audio Transmission
• Input Volume
• Voice Activity Detection
• Echo Canceller
• Audio Reception
• Output Volume
Note
P. 1-31).