Power Boost; Automatic Settings; Warm; Simmer - Sharp SCH2443GB Operation Manual

POWER BOOST

Use Power Boost to cook at maximum power for a short period
of time. Power Boost is only recommended for bringing water
to a boil.
Touch the – keypad to reduce power level to level 9. After 10
minutes of Power Boost, the power level automatically reduces
to level 9. When Power Boost expires and the level reduces to 9,
a tone will sound and the digital display will switch from P to 9.
Do not leave unit unattended while Power Boost
WARNING
or other high power settings are in use.

AUTOMATIC SETTINGS

The Induction Cooktop has 3 preset cooking functions: Warm,
Simmer and Melt.

1. WARM

Warm will maintain temperature of 150ºF for up to 5 hours
before automatically turning OFF.
TURN WARM ON
1 Place a compatible pot or pan on the desired heater and
touch the ON/OFF keypad to turn heater ON. A tone will
sound and the number 0 will display, indicating no power
level has been set.
2 Touch the SIMMER/WARM keypad once. A tone will sound
and the letter A and the word WARM will display.
TURN WARM OFF
• Touch the ON/OFF keypad to turn the heater OFF.
OR
• Touch the + or – keypads to increase or decrease power level
to deactivate the Warm function. A tone will sound and the
letter A and the word WARM will clear from the display.
NOTE: If SIMMER/WARM is pressed when Warm is in use,
the heater function will automatically switch to Simmer.

2. SIMMER

Simmer will maintain temperature of 195ºF for up to 5 hours
before automatically turning OFF.
TURN SIMMER ON
1 Place a compatible pot or pan on the desired heater and
touch the ON/OFF keypad to turn heater ON. A tone will
sound and the number 0 will display, indicating no power
level has been set.
2 Touch the SIMMER/WARM keypad twice. A tone will
sound and the letter A and the word SIMMER will display.
TURN SIMMER OFF
• Touch the ON/OFF keypad to turn the heater OFF.
OR
• Touch the + or – keypads to increase or decrease power level
to deactivate the SIMMER function. A tone will sound and the
letter A and the word SIMMER will clear from the display.
USING THE COOKTOP
NOTE: If SIMMER/WARM is pressed when Simmer is in use,
heater function will automatically switch to Warm.

3. MELT

Melt will maintain temperature of 105ºF for up to 5 hours before
automatically turning OFF.
TURN MELT ON
1 Place a compatible pot or pan on the right rear (24" model)
or middle rear (30" model) heater and turn the heater ON.
A tone will sound and power level 0 will display, indicating
no power level has been set.
2 Touch the MELT keypad. A tone will sound and the letter A
and the word MELT will display.
TURN MELT OFF
• Touch the ON/OFF keypad to turn the heater OFF.
OR
• Touch the + or – keypads to increase or decrease power level to
deactivate the Melt function. A tone will sound and the letter
A and the word MELT will clear from the display.

BRIDGE HEATER

The left front and left rear heaters can be synced to accommodate
larger cookware, such as a 9" x 18" griddle specifically designed
for use with ceramic glass cooktops.
TO TURN BRIDGE ON
1 Place compatible cookware, such as a griddle, on the left
front and left rear Induction heaters.
2 Touch the ON/OFF keypad to turn either of the heaters ON.
A tone will sound and 0 will display on the selected heater.
3 Touch the BRIDGE keypad to sync the two heaters. A tone
will sound and the number 0 and the word BRIDGE will
display for both heaters.
4 Use + and – keypads to select desired power level. Either
heater's keypad may be used to control the settings. If a power
level is not set within 10 seconds, the BRIDGE function will
automatically turn OFF, and the heaters will no longer be
synced. The heaters will remain ON however, and power
levels may be set or turned OFF individually.
TO TURN BRIDGE OFF
Touch the BRIDGE keypad to deactivate the BRIDGE function.
After 10 seconds a tone will sound and both heaters will show
power level 0 and the word BRIDGE will clear from the displays.
NOTE: Each heater must be turned OFF separately after the
BRIDGE function has been deactivated. Touch the ON/OFF
keypad to turn each heater OFF.

PAUSE

Pause may be used to temporarily stop all cooking functions
and timers for up to 10 minutes without erasing settings. To use
the Pause function, at least one heater or timer must be in use.
When the cooktop operation is paused, all controls are locked
automatically except the heaters' ON/OFF keypad.
13 E