Copying To Multiple Computers - HP Rp5000 - Point of Sale System Management Manual

Copying to Multiple Computers

Ä
✎
Desktop Management Guide
7. Turn off the computer to be configured and insert the
configuration diskette or USB flash media device.
8. Turn on the computer to be configured.
9. As soon as the computer is turned on, press
monitor light turns green to enter Computer Setup. Press
bypass the title screen, if necessary.
10. Click File > Replicated Setup > Restore from Removable
Media, and follow the instructions on the screen.
11. Restart the computer when the configuration is complete.
CAUTION: A setup configuration is model-specific. File system
corruption may result if source and target computers are not the same
model. For example, do not copy the setup configuration from an
Ultra-Slim Desktop to a Microtower.
This method takes a little longer to prepare the configuration diskette
or USB flash media device, but copying the configuration to target
computers is significantly faster.
A bootable diskette is required for this procedure or to create a
bootable USB flash media device. If Windows XP is not available to
use to create a bootable diskette, use the method for copying to a
single computer instead (see
page 14).
1. Create a bootable diskette or USB flash media device. See
"Supported USB Flash Media Device" on page
USB Flash Media Device" on page
Flash Media Device" on page 20.
www.hp.com
Desktop Management Guide
F10
"Copying to Single Computer" on
17, or "Unsupported USB
when the
Enter
to
17, "Supported
15