HP Rp5000 - Point of Sale System Management Manual page 20

Desktop Management Guide
Ä
✎
16
CAUTION: Not all computers can be booted from a USB flash media
device. If the default boot order in the Computer Setup (F10) Utility lists
the USB device before the hard drive, the computer can be booted from a
USB flash media device. Otherwise, a bootable diskette must be used.
Some Systems allow the boot device to be selected during POST. As soon
as the computer is turned on, press
green, then follow the on screen instructions when prompted.
2. Select a setup configuration to copy. Turn off the computer. If
you are in Windows, click Start > Shut Down > Shut Down.
3. If you are using a USB flash media device, insert it now.
4. Turn on the computer.
5. As soon as the computer is turned on, press
monitor light turns green to enter Computer Setup. Press
bypass the title screen, if necessary.
F10
If you do not press
computer and again press
access the utility.
6. If you are using a a diskette, insert it now.
7. Click File > Replicated Setup > Save to Removable Media.
Follow the instructions on the screen to create the configuration
diskette or USB flash media device.
8. Download a BIOS utility for replicating setup (repset.exe) and
copy it onto the configuration diskette or USB flash media
device. To obtain this utility, go to
http://welcome.hp.com/support/files
number of the computer.
9. On the configuration diskette or USB flash media device, create
an autoexec.bat file containing the following command:
repset.exe
10. Turn off the computer to be configured. Insert the configuration
diskette or USB flash media device and turn the computer on.
The configuration utility will run automatically.
11. Restart the computer when the configuration is complete.
www.hp.com
F9
when the monitor light turns
at the appropriate time, you must restart the
F10
when the monitor light turns green to
and enter the model
Desktop Management Guide
F10
when the
Enter
to