Smart Cover Lock - HP Rp5000 - Point of Sale System Management Manual

Desktop Management Guide
Setting the Smart Cover Sensor Protection Level
✎

Smart Cover Lock

Ä
✎
36
To set the Smart Cover Sensor protection level, complete the
following steps:
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart.
2. As soon as the computer is turned on, press
monitor light turns green to enter Computer Setup. Press
bypass the title screen, if necessary.
F10
If you do not press
computer and again press
access the utility.
3. Select Security > Smart Cover > Cover Removal Sensor, and
select the desired security level.
4. Before exiting, click File > Save Changes and Exit.
The Smart Cover Lock is a software-controllable cover lock featured
on some HP computers. This lock prevents unauthorized access to the
internal components. Computers ship with the Smart Cover Lock in
the unlocked position.
CAUTION: For maximum cover lock security, be sure to establish a
setup password. The setup password prevents unauthorized access to the
Computer Setup utility.
The Smart Cover Lock is available as an option on some systems.
www.hp.com
at the appropriate time, you must restart the
F10
when the monitor light turns green to
Desktop Management Guide
F10
when the
Enter
to