Searching For Networks To Access - HP iPAQ h6315 Networking Manual

9. If a network key is provided by the network automatically, then tap the The Key is provided for me
automatically checkbox. Otherwise, enter the network key in the Network key box.
10. If IEEE 802.1x is supported by the network environment, then tap the 802.1x tab. On the 802.1x
tab, check the Use IEEE 802.1x network access control checkbox. Select the appropriate EAP type
from the drop-down list. 802.1x provides an increased level of security. If unsure whether the
network environment supports the 802.1x protocol, then contact the network administrator.
11. Tap OK twice to exit the Configure Network Authentication window and Configure wireless
networks window.
12. Tap the Select Networks box on the Connections screen to open the Network Management
window. Under Programs that automatically connect to the Internet should connect using tap the
down arrow and select My Work Network. Tap OK three times to return to the Today screen.
13. Perform a soft reset of the HP iPAQ. When the wireless card associates with an access point, the
Logon Window pop-up box appears. Select the appropriate keyboard and enter the user name
and the password to be used. Leave the domain field blank, and tap the Save Password box.

Searching for networks to access

Networks that you have already configured are preferred networks and can be found in the iPAQ
Wireless screen > Settings > Wireless Networks list box. You can choose whether to connect only to
preferred networks or to have your HP iPAQ search for and connect to any available network
(preferred or not).
To search for networks to access:
• From the iPAQ Wireless screen, tap Settings > Wireless tab.
• In the Networks to access box, tap the type of network you want to connect to (All Available, Only
access points, or Only computer-to-computer).
• To connect only to networks that have already been configured, clear the Automatically connect to
non-preferred networks checkbox.
Note: If you check the Automatically connect to non-preferred networks checkbox, your HP iPAQ detects any new networks
and provides you the opportunity to configure them.
Managing wireless networks
In managing your wireless networks, sometimes it is necessary to change network settings. In the next
sections, learn how to view, edit, and delete available wireless network settings.
Viewing or editing a network
To view or edit an existing or available wireless network:
1. Be sure Wi-Fi is on.
2. Tap the iPAQ Wireless icon.
3. From the iPAQ Wireless screen, tap Settings > Wireless tab.
4. In the Configure Wireless Networks box, tap the desired network name.
5. Edit the existing settings as necessary, and then tap OK to save the changes.
Deleting a network
To delete an existing or available wireless network:
1. Be sure Wi-Fi is on.
2. Tap the iPAQ Wireless icon.
3. From the iPAQ Wireless screen, tap Settings > Wireless tab.
4. In the Configure Wireless Networks box, tap and hold the network you want to delete.
5. Tap Remove Settings.
10