H5400 Series With Microsoft Pocket Pc 2003 Rom Upgrade - HP iPAQ h6315 Networking Manual

Perform the following steps to change the server settings on HP iPAQ Pocket PC h5400 series with
Microsoft Pocket PC 2002 handheld devices:
1. Contact the ISP or network administrator to:
• Determine the correct name resolution
• Obtain the specific server IP address
• Determine if alternate addresses are available
2. Turn on the WLAN.
3. On the Today screen, tap Start > iPAQ Wireless > iPAQ WLAN.
4. Select the desired profile from the Profile drop-down list.
5. Tap the Edit button.
6. Tap Next.
7. Select Use specific IP address
8. Enter the appropriate information.
9. Tap Next.
10. Tap Finish.
11. Tap OK to close the window.
h5400 series with Microsoft Pocket PC 2003 ROM
upgrade
This section includes the following topics:
•
Turning on and off the WLAN
•
Connecting to a network
• Manually entering new network settings
•
Working with HP supported wireless authentication protocols
•
Searching for networks to access
•
Managing wireless networks
•
Network settings
• VPN server connections
Turning on and off the WLAN
Perform the following steps to turn on or off the WLAN:
1. On the Today screen, tap Start > iPAQ Wireless.
2. On the iPAQ Wireless screen, tap the Wireless Control icon.
3. When the Wireless Control screen appears, tap the WLAN icon. The WLAN icon displays in
orange (off); tap the WLAN icon to turn on the WLAN. The icon changes to green (on) and the
WLAN indicator light flashes orange.
Note: Even though the WLAN indicator flashes green (on) it does not necessarily mean a connection has been established.
Battery saving tip:
Turn of the WLAN when you are not using it.
32