Typical Wlan Setup And Installation Scenarios - HP iPAQ h6315 Networking Manual

1. Contact your network administrator for your user name, password, domain name, TCP/IP
settings, and host name or IP address of the VPN server.
2. Be sure Wi-Fi is powered on.
3. From the Start menu, tap Settings > Connections tab > Connections icon > Tasks tab.
4. Under My Work Network, tap Add a new VPN server connection.
5. Follow the instructions in the New Connection wizard.
Note: For online Help for any screen in the New Connection wizard or while changing settings, tap the ?.
Changing a VPN connection
1. Be sure Wi-Fi is powered on.
2. From the Start menu, tap Settings > Connections tab > Connections icon > Tasks tab.
3. Under My Work Network, tap Manage existing connections > VPN tab.
4. Tap the VPN connection you want to change, then tap Settings.
5. In the Name box, enter a name for the connection (for example, your company's name).
6. In the Host name/IP box, enter the VPN server name or IP address.
7. Next to VPN type, tap the type of authentication to use with your device (IPSec/L2TP or PPTP). If
you aren't sure which option to choose, ask your network administrator.
8. Tap Next.
Note: If you selected PPTP in the previous screen, then skip the following step.
9. If you selected IPSec/L2TP on the previous screen, tap the type of authentication. If you selected A
pre-shared key, enter the key provided by your network administrator, then tap Next.
10. Enter the user name, password, and domain name provided by your network administrator.
Note: If a domain name was not provided, you may be able to connect without entering one.
11. To change advanced settings, tap the Advanced button.
Note: You will not need to change advanced settings unless the server to which you are connecting does not use dynamically
assigned IP addresses and you need to enter your TCP/IP settings or you need to change server DNS or WINS settings.
12. Tap the Finish button.
Starting a VPN connection
To start a connection through a VPN server, be sure Wi-Fi is powered on, and then select the VPN
network. Your HP iPAQ will automatically begin connecting.

Typical WLAN setup and installation scenarios

Updating the HP iPAQ while connected to a desktop computer
IMPORTANT: To prevent file corruption, keep the HP iPAQ connected to the power adapter during the installation process.
1. Ensure that the HP iPAQ is docked and connected to a desktop computer running Microsoft®
ActiveSync® v3.7 or later.
2. Apply A/C power to the HP iPAQ (plug in the HP iPAQ to an electrical outlet).
3. Launch the SoftPaq update.
Note: SoftPaqs can be found on the HP Business Support Center web site at
4. Follow the onscreen instructions and dialog boxes.
5. Undock the HP iPAQ and perform a soft reset to complete the update.
www.hp.com
.
54