Setting Up A Wireless Network - HP iPAQ hx2000 Additional Information

Setting Up a Wireless Network

Tap Start > Settings > Connections tab > Network Cards
1.
> Wireless tab.
Do one of the following:
2.
•
•
NOTE: To manually start a connection, tap and hold the connection,
then tap Connect.
If you cannot see your wireless network on your HP iPAQ, it could be a
non-broadcasting network. Try the following:
1. Tap Start > Settings > Connections tab > Connections
icon > Settings.
Tap the Advanced tab > Select Networks.
2.
3. Follow the on-screen instructions.
If you do not see a desired network, tap Add New and
follow the instructions on the screen.
Any networks that you have already configured are preferred
networks and are listed under Wireless networks. To
change network settings, in Wireless networks, tap a
network.
8