Com Port - HP iPAQ hx2000 Additional Information

Setting Up an Incoming or Outgoing Bluetooth

COM Port

1. Be sure your HP iPAQ is connected to the other device via
Bluetooth.
2. Tap Start > Settings > Connections tab.
Tap Bluetooth > COM Ports tab.
3.
Tap New Incoming Port or New Outgoing Port.
4.
NOTE: New Outgoing Port is only available if at least one Bluetooth
device supports serial (COM) connection.
5. Select a numbered COM port from the list.
NOTE: If the port cannot be created, it is in use. Select a different
numbered port.
6. To limit communication on this COM port to only devices with
which the HP iPAQ has a Bluetooth partnership, select the Secure
Connection check box.
Tap Finish.
7.
97