Configuring Network Security Settings - HP iPAQ hx2000 Additional Information

Configuring Network Security Settings

A wireless network can be added when the network is automatically
detected. Or, you can manually enter the settings information to add the
network. Before doing these steps, determine if authentication information
is needed.
To manually enter information, tap Start > Settings >
1.
Connections tab > Network Cards > Wireless tab.
In Wireless networks, select the network you want to
2.
configure.
To use authentication, tap the Network Key tab and select the
3.
authentication method from the Authentication list.
4. To use data encryption, select an encryption method from the
Data encryption list.
To automatically use a network key, tap The key is
5.
automatically provided. Otherwise, enter the network key.
30