Wired With Cross-Over Cable - HP EN5000 User Manual

wired with cross-over cable

crossover cable
(not included)
If you don't have a home network, it is still possible to
access your music and photos on a single PC. Connect
a network crossover cable (not included) from the
media receiver to the network connection on your PC.
If your PC does not have a network connection, you
will need to purchase a network card.
Choose a static address for your PC and one for your
media receiver. For example, you can use
192.168.0.1 for your PC, and 192.168.0.2 for your
media receiver. Use a netmask of 255.255.255.0 for
both.
To configure the receiver for a cross-over cable:
1. Press options
2. Select Network Setup
3. Set Connection to Wired (Ethernet)
TV
4. Select Address
5. Set Configuration to static
6. Set the IP Address to 192.168.0.2
7. Set the Netmask to 255.255.255.0
8. Press left arrow to return to receiver options
9. Select Apply Changes to apply the network
changes
Follow the instructions that came with your network
card for setting a static IP address of 192.168.0.1 on
your PC.
39
user's guide