Installing The Router; Installing An Air Filter - HP MSR 2000 Preparing For Installation

Installing the router

Installing an air filter

No air filter is provided with the router. Purchase one yourself.
To install an air filter:
Face the left side (side of the inlet vents) of the router.
1.
Install the upper and lower guide rails of the air filter to the chassis. See
2.
Fasten the fastening screws on the guide rails with a Phillips screwdriver.
3.
Figure 3 Installing the upper and lower guide rails
Push the air filter along the slide rails from the rear side of the chassis to the front.
4.
Fasten the captive screws on the air filter.
5.
Figure 4 Pushing the air filter along the guide rails
iii
Figure 3.