ABB HT574400 Operation Manual page 46

Operation Manual / 4 Product description / A100-M axial
2 Removal and installation
Fixing clamping nuts
Figure 13: CE foot contact surface
Tighten clamping nuts on compressor end (CE) (see Tightening the clamping nut [➙ 17]).

Figure 14: TE foot: Handling of cup spring contact surface / foot contact surface
Coat the contact surface (F) for the cup springs (X) (see Table 3) at the foot of the turbine

end (TE) with high-temperature grease.
Tighten clamping nuts on turbine end (TE) (see Tightening the clamping nut [➙ 17]).

© Copyright 2016 ABB. All rights reserved. HZTL4033_EN
Page 16 / 113
Revision A July 2016