ABB HT574400 Operation Manual page 96

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly Page 66 / 113
Remove compressor casing
Figure 32: Remove compressor casing
1. Using shackle (90195) and lifting gear, fasten lifting device (90190) to compressor casing
(72000) and secure to crane.
2. Loosen and remove nuts (61037).
3. Use press-off nuts (61090) to fully press off and remove compressor casing (72000).
4. Remove and dispose of the O-ring (42012).
© Copyright 2016 ABB. All rights reserved. HZTL4033_EN Revision A July 2016