Table of Contents
Advertisement
Available languages
Available languages
English
WARNING: Burn hazard. Do not touch the the blade immediately after use. Contact
with the blade may result in personal injury.
Approved Materials
This tool is intended for use with paper, fabric, plastic, cardboard, leather, canvas, wallpaper,
thin rubber, thin carpet, vinyl, and thin wire mesh.
Project Tips
•
Cut only with sharp blades; they cut cleaner, faster and put less strain on the motor
while cutting.
•
When cutting materials with adhesive backing periodically clean blades; adhesive
residue will build up on blades reducing the quality of cut and strain the motor.
•
When cutting curves, do not tilt the tool; keep the blades perpendicular to the
work piece.
•
Advance blades into the material without forced effort or unnecessary pressure.
A little practice will enable you to determine what forward pressure gives you the
smoothest cutting.
MAINTENANCE
WARNING: To reduce the risk of serious personal injury, turn unit off and lock
the trigger before making any adjustments or removing/installing attachments
or accessories. An accidental start‑up can cause injury.
Your BLACK+DECKER power tool has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Cleaning
WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once
a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh chemicals for cleaning the non‑metallic
parts of the tool. These chemicals may weaken the plastic materials used in these parts.
Use a cloth dampened only with water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories
WARNING: Since accessories, other than those offered by BLACK+DECKER, have not
been tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only BLACK+DECKER recommended accessories should be
used with this product.
12
Advertisement
Table of Contents
