Specifications - Sharp HR-MB3 Operation Manual

Specifications

HR-MB3
ENGLISH
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Power source: DC 6 V: AC adaptor
(AC 100 - 240 V, 50/60 Hz)
DC 5 V: USB bus power
Power consumption: 7 W (switching type AC adaptor)
Charging time: Approx. 4 hours
(fully charged, when using the
AC adaptor included with the
unit)
Dimensions: Width: 56.5 mm (2-1/4")
Height: 17.4 mm (11/16")
Depth: 105.5 mm (4-5/32")
Weight: 113 g (0.25 lbs.)
Sockets: Earphones
(impedance: 32 ohms)
USB (Exclusive type)
DC input
Frequency response: 20 - 20,000 Hz
E-39
HR-MB3 TINSZA173AWZZ
Audio format: WMA (CBR/VBR),
MP3 (CBR/VBR), WAV (PCM)
Bit rate: WMA (32 - 320 kbps),
MP3 (8 - 320 kbps)
Sampling frequency: WMA (8 - 48 kHz),
MP3 (8 - 48 kHz),
WAV (22.05 - 48 kHz)
Music MetaData: ID3 Tag (Version 1.0/1.1/2.3/
2.4), WMA object
Storage media: 4 GB hard disk drive (1 inch)
Output level: Earphones: 5 mW + 5 mW
(maximum output level/32
ohms)
Battery life: Up to 20 hours of continuous
playback by fully charged re-
chargeable Lithium-ion battery
PC interface: USB 1.1/2.0
Notes:
" A combination of sampling frequency and bit rate dif-
fers depending on audio format.
" Continuous playback:
At 128 kbps, in MP3 format (earphone output: 0.1 mW
+ 0.1 mW, backlight: not set to "Always", equaliser: set
to "Flat")
" Actual battery life will vary with use.
" The values are the standard values when the unit is
used at an ambient temperature of 25°C (77°F).
05/4/10 HR-MB3_SEEG_E.fm
1