Mitsubishi Electric Netcom 2 User Manual page 14

4. Select Control Panel.
5. Under "Network and Internet"
6. In the "Network and sharing center" double click on the
7. In the "local Area Connection Status" select
8. Double click on
9. Select the "Use the Following IP address" radio button.
10. Enter the following information;
IP Address: 192.168.0.1
Subnet Masks: 255.255.255.0
Default gateway: 192.168.0.253
SVA026 Netcom 2 User Manual ver5
select "view network and status tasks".
"local Area Connection".
.
.
14