Location Of Parts And Controls; Front Panel; Display - Sony WRR-800A Service Manual

Location of Parts and Controls

Front Panel

1 POWER switch
ON
OFF
POWER
4 SET button
5 GP button
1 POWER switch
Turns the power on and off.
2 ANTENNA A, B (antenna A, B) connectors (BNC
type)
Connect the supplied antennas.
Location of Parts and Controls
5 GP (group) button
Press to change the group or to display frequencies.
6 CH (channel) button
Press to change the channel in a group.
7 VOL. (volume) control
Adjusts the volume of the tuner output.

Display

1 BATT indicator
2 RF indicator
3 AF indicator
4 AF indication
BATT
AF BATT
RF
AF
GP CH
10
WRR-800A(AU)
2 ANTENNA A, B connectors
3 Display
ANTENNA A
BATT
GP
AF BATT
RF
AF
SET CH
GP CH
3 Display
Displays the status of this unit and the groups and channels
assigned to the unit.
For details, see the following section "Display".
4 SET button
Press to change the group or channel.
1 BATT (battery) indicator
5 BATT (battery) indication
Indicate the condition of the wireless microphone
transmitter batteries. The indicator and indication start
flashing about one hour before the transmitter batteries go
flat.
2 RF (radio frequency) indicator
7 RF (radio frequency) indications
The indicator lights and the indications (dots) appear when
the antenna reception is optimal. Depending on the RF input
level, the number of dots changes.
3 AF (audio frequency) indicator
4 AF (audio frequency) indication
The indicator lights and the indication appears when the
audio output level is higher than the reference level.
6 GP/CH (group/channel) indication
Shows the reception channel group and respective channel
5 BATT indication
number.
Pressing the GP button changes this indication to the
frequency indication.
6 GP/CH indication
7 RF indications
VOL. ANTENNA B
MIN MAX
7 VOL. Control
6 CH button
9
1-5