Power Consumption - Huawei MU609 Mini Hardware Manual

HUAWEI MU609 Mini PCIe Module
Hardware Guide
Table 5-6 Requirements for input current of the MU609 module
Power
VCC_3V3

5.6.2 Power Consumption

The power consumptions of MU609 module in different scenarios are respectively
listed in Table 5-7 , Table 5-8 , Table 5-9 and Table 5-10 .
The power consumption listed in this section is tested when the power supply of the
MU609 module is 3.3 V. Typical values are measured at room temperature, and
minimum and maximum values are measured over the entire operating temperature
range.
Table 5-7 Averaged standby DC power consumption
Description
HSPA+/WCDMA
(Standby)
HSPA+/WCDMA
(Standby)
GPRS/EDGE
(Standby)
GPRS/EDGE
(Standby)
Table 5-8 DC power consumption (HSPA/WCDMA)
Description
WCDMA
Issue V0.1 (2013-05-16)
Module Peak (GSM 2 slot)
MU609 2700 mA
Bands Test Value
UMTS
2.1
bands
UMTS 2.6
bands
GSM 2.3
bands
GSM 2.8
bands
Band
Band I (IMT2100)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Electrical and Reliability Features
Normal (WCDMA)
1000 mA
Units Notes/Configuration
mA DRX cycle=8 (2.56 s)
Module is registered on and
not connected to the 3G
network.
USB is in suspend mode.
mA DRX cycle=6 (0.64 s)
Module is registered on and
not connected to the 3G
network.
USB is in suspend mode.
mA MFRMS=5 (1.175 s)
Module is registered on and
not connected to the 2G
network.
USB is in suspend mode.
mA MFRMS=2 (0.47 s)
Module is registered on and
not connected to the 2G
network.
USB is in suspend mode.
Test Value Units
300 mA
Power (dBm)
1 dBm Tx Power
34