Conducted Rf Measurement; Test Environment; Test Standards; Conducted Rx Sensitivity And Tx Power - Huawei MU609 Mini Hardware Manual

HUAWEI MU609 Mini PCIe Module
Hardware Guide

4.3 Conducted RF Measurement

4.3.1 Test Environment

Test instrument
Power supply
RF cable for testing
Test instrument

4.3.2 Test Standards

Huawei modules meet 3GPP TS51.010-1 and 3GPP TS34.121-1 test standards.
Each module passes strict tests at the factory and thus the quality of the modules is
guaranteed.

4.4 Conducted Rx Sensitivity and Tx Power

4.4.1 Conducted Receive Sensitivity

The conducted receive sensitivity is a key parameter that indicates the receiver
performance of MU609 module. The conducted receive sensitivity refers to the
weakest signal that the module at the antenna port can receive. The BER must meet
the 3GPP protocol requirements in the case of the minimum signal.
The 3GPP Protocol Claim column in Table 4-2 lists the required minimum values,
and the Test Value column lists the tested values of the MU609 module.
Table 4-2 MU609 module conducted Rx sensitivity (Unit: dBm)
Band
GSM 850
GSM 900
DCS1800
PCS 1900
WCDMA B1 Main Rx
Issue V0.1 (2013-05-16)
R&S CMU200
KEITHLEY 2306
L08-C014-350 of DRAKA COMTEQ or Rosenberger
Cable length: 29 cm
R&S CMU200
The compensation for different frequency bands relates to the cable and the test

environment.
The instrument compensation needs to be set according to the actual cable conditions.

Typical
–109
–109.5
–108
–108
–109.5
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Note
BER Class II < 2.44%
BER Class II < 2.44%
BER Class II < 2.44%
BER Class II < 2.44%
BER < 0.1%
RF Specifications
24