Figure 12
1. Bolt (1/2 x 3 inches)
2. Pivot pin
5.
Raise the roll bar into the upright position and
lock it into place using the pivot pin and hairpin
cotter on both sides of the roll bar
Figure 13
6.
Torque all 1/2-inch bolts to 102 N∙m (75 ft-lb).
7.
Install the rear tires. Torque the lug nuts to 95 to
122 N∙m (70 to 90 ft-lb).
8.
Lower the machine to the ground.
g222813
3. Locknut (1/2 inch)
(Figure
13).
g222859
8