Sony DCR-SR32E Manual page 28

9. CAMERA Adjustment 6
[Switch setting]
1. POWER switch ............................................................ Movie
2. NIGHTSHOT PLUS switch ........................................ OFF
3. (HOME) menu - (SETTINGS) - MOVIE SETTINGS
WIDE SELECT ........................................................... 4:3
[Picture Frame Setting (Color reproduction adjustment
frame)]
1) Shoot the color bar chart.
PTB-450: 1 m from the front of lens
PTB-1450: 40 cm from the front of lens
2) Adjust the zoom and the camera direction, and set the speci-
fied position.
Check on the oscilloscope
1. Horizontal period
A = B
B
A
H
2. Vertical period
E E = F
V
Check on the monitor TV (Underscanned mode)
Color bar chart picture frame
Fig. 6-1-14
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
C = D
C
D
F
Monitor TV picture frame
[Adjusting method]
1) Click the [Start] button in CAMERA Adjustment 6, and the
following screen will appear.
2) Select the model (NTSC or PAL) with the Model Select radio
button.
Note: NTSC model: DCR-SR42/SR42A
PAL model: DCR-SR32E/SR33E/SR42E
3) Click the [Color Reproduction Adjustment] button.
4) The following message will be displayed, and then shoot the
color bar chart and set the picture frame, and then click the
[OK] button.
(Refer to "Picture Frame Setting")
6-26
Ver. 1.7 2008.04