Sony DCR-SR32E Manual page 6

• Adjusting items when replacing a board
When replacing a board, adjust the items indicated by z in the following table.
Adjustment
Adjusting item
Destination
Destination data set
Data Set
USB Serial No.
USB serial No. input
Input
Origin oscillation check
(Note 1)
S VIDEO OUT Y level adj.
VIDEO
S VIDEO OUT chroma level adj.
adjustment
VIDEO OUT level check
CAMERA
HALL adj.
adjustment 1
CAMERA
Flange back and zoom lever center adj.
adjustment 2
CAMERA
Flange back check
adjustment 3
F No. standard data input
CAMERA
MAX GAIN adj.
adjustment 4
Mechanical shutter adj
Color reproduction adj.
CAMERA
Color reproduction check
adjustment 5
AWB standard data input
LV standard data input
CAMERA
AWB adj.
adjustment 6
AWB check
CAMERA
Steady shot check
adjustment 7
LCD automatic adj. (VCO adj, Contrast adj.)
V-COM adj.
LCD
adjustment
Transmissive moed white balance adj.
Reflective mode white balance adj.
Touch panel
Touch panel adj.
adjustment
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
z
z
z
z
z
z
Table 6-1-2 (2)
Board
replacement
z
z
z
z z
z
z
z
z
z
z
z
z z
z
6-4
Ver. 1.7 2008.04
Note 3: IC2201 (Flash memory) on
the VC-489 board cannot be
replaced.