Requirements For Electrical Connection; Connecting Signal And Ethernet Cables - Siemens SIPROCESS GA700 Operating Instructions Manual

Connecting
8.2 Electrical connections
Note
Securing plug-in connections
Plug-in connections without interlock can loosen and fall out.
• Secure plug-in connections without interlock mechanically, for example, with a cable tie.
8.2.3

Requirements for electrical connection

• You have ensured that a power disconnection unit belonging to the device is located in the
direct vicinity of the device.
This power disconnection device must be labelled so that it is linked exclusively with this
device.
• You have checked that the existing power supply corresponds to that specified on the rating
plate of the device.
8.2.4

Connecting signal and Ethernet cables

Note
Separate laying of signal lines
Install the signal lines separately from the power lines.
76
Rack-mounted device
Operating Instructions, A5E31874006-12