Sharp DV-500D Technical Manual page 87

DV-560H
Servo adjustment value
reading-out mode
DVDOpe( )
(0x4000)
Test1
(F1h)
key
Argument of AdjDisplay(*)
is char 0:CD/1:DVD.
(1)Servo version display
(2)Focus offset value display
(3)Track offset value display
(4)0-layer focus balance value display
(5)1-layer focus balance value display
(6)Track balance value display
(7)0-layer focus gain value display
(8)1-layer focus gain value display
(9)Track gain value
(10)RF amplitude value display
(11)RF gain value display
(12)Internal circumference switch ID
'PLAY'
During stop in DVD/CD/VCD mode,
servo adjustment value reading-out
mode is selected if Test 1 key (F1h)
is input.
AdjDisplay(*)
(0xFF00)
If the servo adjustment value reading-out
mode is selected, disc is stopped.
F1000001 ********
'PLAY'
F1000002 ********
'PLAY'
F1000003 ********
'PLAY'
F1000004 ********
'PLAY'
F1000005 ********
'PLAY'
F1000006 ********
'PLAY'
F1000007 ********
'PLAY'
F1000008 ********
'PLAY'
F1000009 ********
'PLAY'
F100000A ********
'PLAY'
F100000B ********
'PLAY'
value display
F100000C ********
CDOpe( )
(0x1000)
Test1
(F1h)
key
In the servo adjustment value reading-out mode,
the focus offset value is first displayed. Every input
of PLAY key, the displayed data is changed as
shown in the left.
After the servo step test, the internal circumference
SW value (ID) display is not defined.
10-6
After measurement is ended in the servo
step test mode,the servo adjustment value
reading-out mode is selected.
SRV Step Test( )