Page 1
— Quick Start Guide Relion® REX610 Display Default view can be selected between main menu and measurements Self-supervision and Ready-LED steady: OK, Ready-LED flashing: Internal Relay Fault (IRF), Start-LED steady: protection started, Start-LED flashing: protection function blocked, Trip-LED: protection operated protection indicator LEDs Programmable LEDs Can be programmed for alarming and indication as latched the signal.
Page 2
2 Q U I C K S TA R T G U I D E Relion® REX610 — Using the local HMI Accessing main menu and local authorization Display header area To use the LHMI, logging in and authorization are required. The icon area at the upper right corner of the dislay shows Password authorization is enabled by default and is the current action or user level.
Page 3
Q U I C K S TA R T G U I D E Relion® REX610 3 — Most common function blocks The most common function blocks are listed below, please refer to the 620 series Technical Manual for the full list. The available function blocks varies depending on the selected IED and configuration used.