Advertisement
To the right of the LCD screen on the front of your appliance
are four buttons used to enter your settings.
To configure settings using the LCD controls:
1
Press Up and Down to read the welcome screen, and
press Right to continue past it.
NOTE:
SMA 7200 only: select either a 1GB or a 10 GB
port.
2
Enter the IP address for your internal interface.
The default internal (X0) IP address is 192.168.0.10. To
change the IP address, use the Left and Right buttons to
position your cursor over the number you want to
change, and then use Up and Down to change the
number. Press Right to continue to the next screen.
3
Enter your subnet mask.
The default subnet mask is 255.255.255.0. To change
the subnet mask, use the buttons as described in the
previous step. Press Right to continue to the next
screen.
4
Cluster configuration.
Specify whether the appliance you are configuring will
be part of a cluster (a high-availability pair of
appliances), and which node it is (enter "1" for the
primary node, and "2" for the secondary node). Press
Right to continue to the next screen.
5
Review your settings and apply them, then wait until
the LCD screen displays Setup is complete.
Running the Setup Wizard
After the LCD configuration steps, the Setup Wizard continues
the initial setup for your SMA 6200/7200 appliance.
To run the Setup Wizard:
1
Configure your management computer with a static IP
address on the same subnet as your internal (X0)
interface. If you kept the default X0 IP address, set
your computer to an IP address on the 192.168.0.0/24
subnet, such as 192.168.0.20, and set the subnet mask
to 255.255.255.0 and the default gateway to
192.168.0.1.
2
Using an Ethernet cable, connect the appliance X0
interface to your management computer.
3
Access the wizard by starting a Web browser and
typing: https://<IP address>:8443 where
<IP address> matches the address you defined for
the internal network interface. The default X0 IP
address is 192.168.0.10.
NOTE:
Accept the certificate warning and continue.
Dell Secure Mobile Access 6200/7200 Getting Started Guide
25
Advertisement
