HP 11793A Operating And Service Manual page 15

Microwave Converter Model 11793A
Option 907
Front Handle Kit
Option 908 Option 909
Rack Flange
Kit
Rack Flange and Front
Handle Combination Kit
Figure
2.
Rack Mounting Options
Accessories Supplied
The accessories supplied with the Microwave Converter are shown in Figure 1.
a.
b.
C .
d.
e.
The line power cable may be supplied in several plug configurations, depending on the destination of
the original shipment. Refer to the Paragraph 12 "Power Cables" in this manual.
Fuses with a 0.7SA rating for both 1 1 5 and 230 Vac (HP part number 21 10-0063) are supplied.
The control cable
(
HP part number 8 120- 18 38) is a 30 cm (1 2 in.) flexible cable with male BNC 50
ohm connectors on each end. It connects to the frequency offset mode output of the measuring
instrument.
The LO cable (HP part number 11793-60009) is a 36 cm (14.5 in.) flexible cable with 3.5 mm
female end connectors. The LO cable includes a 3.5 mm male to Type-N male adapter. The cable
connects to tlie output of the LO source. Options
001, 01
1, and 021 delete the adapter.
The IF cable (HP part number 11793-60006) is a 25 cm (10 in.) flexible cable with Type-N male 50
ohm end connectors. The cable connects to the RF input of the measuring instrument.
4