Troubleshooting; Further Information - Panasonic Air-e FV-15CSD1 Installation And Operating Instructions Manual

Nanoe generator
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

Check the product according to the table below if a fault occurs. If the error still occurs,
disconnect all-poles switch of the product, and contact your dealer.
Symptom
· Fan doesn't rotate
· No wind blows out
· Running LED light
(blue)doesn't light
Smells peculiarly
Sounds "zi" lightly
around the orifice
LED light (blue)
blinks
Abnormal shaking
or noise

FURTHER INFORMATION

Generating environment
nanoe
TM
X is generated using the air in the room and hence, depending on the temperature
and humidity, there can be incidences whereby nanoe
Conditions for generated
Room temperature: About 5 °C ~ 40 °C (dew-point temperature: more than 2 °C)
Relative humidity: About 30% ~ 85%
Small amount of ozone will be generated
When nanoe
X ion is generated, small amount of ozone will be release. However, the
TM
quantity will be less than the usual level in forest or natural environment, and not
harmful to human beings.
About nanoe
TM
The so-called nanoe™ X are particulate ions containing hydroxyl
radicals whose amount is 10 times that of nanoe™.
nanoe™ X are charged water purification particles generated by
applying high voltage to separate water molecules.
nanoe™ X features: high moisture content, small particles, stability.
1. High moisture content (the moisture content is 1,000 times the moisture content of
ordinary anions)
2. Small particles (about 5 nm - 20 nm in size)
3. Stability (nanoe™ X has a 6 times higher stability than an ordinary anions, with a 10-meter
or longer range of coverage)
4. High OH hydroxyl amount (up to 4,800 billion of OH ions are generated per second)
5. Weak acidity (with weak acidity features close to that of hair and skin)
Note: nanoe
and the nanoe
TM
Switch is off
Incorrect wiring
When nanoe
small amount of ozone will
be release. However, it will
be not harmful to human beings
The sound comes with nanoe
generating. It is hard to detect
it
The product is in abnormal
Failure installation of louver
or product abnormal
X
mark are trademarks of Panasonic Corporation.
TM
Cause
TM
X is generated,
X
TM
(About nanoe
TM
Troubleshooting
Turn the switch on
Contact your dealer
It is the performance when
product is normally running,
not function abnormal
It is the performance when
product is normally running,
not function abnormal
Contact your dealer
Contact your dealer
TM
X)
X is not stably generated.
7

Advertisement

Table of Contents
loading

Table of Contents