Table of Contents
Advertisement
How to Use the Portable ROM Player
Playback starts through reception of encoded infrared signals or by inputting commands with the numerical
keys.
Playback through the reception of encoded infrared signals
There are two types of playback available: "Point reception" which operates in close proximity to the exhibited
work of art, and "Auto reception" which operates automatically when the Portable ROM Player enters an area of
reception.
• Starting playback through Point
reception. (Pointing method)
1
Point the extended pointer on top of
the Portable ROM Player at the
Infrared Address Transmitter.
• For information on the signal transmission
distance, refer to Transmission Area on page 11.
2
Press
.
PLAY
• The encoded infrared signals
are received and when a "Point
PLAY
message" is present, playback
will start. When playback does
not start, move closer to the
Infrared Address Transmitter
and push
What to do when the message is too fast or needs to be repeated ?
• Playback at a slower speed
• Press the SLOW button when
Light turns on.
listening to information that is
in a foreign language or for
any other reason you may
SLOW
want to slow down playback.
The indicator light turns on and
the message is played back
slowly from the beginning.
Press the SLOW button once
more to return to the normal
speed. However when the
playback file uses the -Law
algorithm, the "SLOW"
function will not operate.
18
• Starting playback through Auto
1
Encoded infrared signals are received
2
< Notice >
• Under the following conditions, playback will NOT
once more.
PLAY
• Replay the message
(continued from page 17)
reception. (Auto Start method)
Enter the transmission area that has
been set for Auto transmission while
holding the Portable ROM Player.
• For information on the signal transmission
distance, refer to Transmission Area on page 13.
When an "Auto message" is present,
playback will start automatically.
start:
When the Portable ROM Player is receiving the
same encoded infrared signal again.
(However, if you exit the transmission area for 2
minutes and then return, playback will start.)
• Press the REPLAY button
to listen once more to the
message that is indicated
REPLAY
by the number in the
display window. Press the
REPLAY button during
playback to listen to the
message from the
beginning.
Advertisement
Table of Contents
