Removing The Palm Rest - Dell Studio 1555 Service Manual

Back to Contents Page
Palm Rest
Dell Studio™ 1555 Service Manual
Removing the Palm Rest
Replacing the Palm Rest
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as the back panel) on the computer.
CAUTION:
is not covered by your warranty.
CAUTION:
inside the computer.
Removing the Palm Rest
1. Follow the instructions in
2. Remove the base cover (see
3. Remove the eight screws from the bottom of the computer.
4. Remove all the Mini-Cards (see
5. Remove the antenna cables from their cable routing.
6. Disconnect the display cable, camera cable, and the power button cable from the respective system board connectors (see
Assembly).
7. Disconnect the touch pad cable and speaker cable from the respective system board connectors.
8. Remove the ten screws on the palm rest.
CAUTION:
rest, or move along the edge, working away from the area of resistance, until the palm rest is free.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Base Cover).
Removing the Mini-Card).
Do not use force to separate the palm rest from the computer. If you encounter resistance, gently flex or apply pressure to the palm
UserManuals.info
Before Working Inside Your Computer) before working
Removing the Display