Hitachi C41V Instruction Manual page 13

6) Fix jelly on the top of the probe with sterile adhesive tape. (See
Fig. 5.)
7) Insert the probe gentry and adjust the probe's position for a clear
view of the desired image. By turning or tilting the probe, a "turn
around" imaging is possible. If the image is insufficient, use
sterile saline solution. This solution improves the contact between
probe and organ.
8) After using the probe, clean, disinfect and sterilize the probe
immediately.
9) Store the probe in the environment indicated in "5 Maintenance and
Safety Inspection".
Sterilized tape
Fig. 5
-7- Q1E-EP1363