Connecting An External Playback Device; Setting The Radio Station - Silvercrest SPLB 44 A1 Quick Start Manual

Connecting an external playback device

You can connect a wide variety of playback devices to this device, for example
MP3 or CD players. Please refer to the operating instructions of the respective
playback device.
♦ Switch all devices off before you connect them with each other.
♦ Connect the line out connection on the external playback device (e.g. head
phone connection) using a 3.5 mm jack cable (not supplied) to the 3.5 mm
jack socket
♦ Set the main switch
♦ Press the
♦ Switch on the connected playback device and start playback.
NOTICE
► During music playback via the 3.5 mm jack socket
are inactive. Use the play/pause and skip functions on the external play-
back device that you have connected.

Setting the radio station

NOTICE
► The technical features of this device enable an adjustable reception capa-
bility that exceeds the permitted FM frequency range of 87.5–108 MHz.
In some countries, different national regulations may apply to the assigned
radio frequency ranges. Please note that information received outside of the
assigned radio frequency ranges may not be exploited, passed on to third
parties or otherwise misused.
♦ Press the
are shown on the display
Search for a station
♦ Press
ments to a station with a higher or lower frequency.
♦ Press
change to the next receivable station at a higher or lower frequency.
The station frequency is shown on the display
off during the station search.
SPLB 44 A1
.
to the position to switch the device on.
button repeatedly until
, and
button repeatedly until
.
or
or
is shown on the display
, the
buttons on the device
and the current frequency
briefly to move in 0.5 MHz incre-
for 2 seconds to automatically
and the speakers are switched
GB │ IE
.
│ 37 ■