Table of Contents
Advertisement
Operation
6.2
System Menu
Set the dip switch SW7 = ON. After the self-test, the system menu of the oper-
ator terminal is displayed on the screen:
The functions of the commands are briefly explained below:
System menu
command
Link
The operator terminal is connected.
Confg
Sets up the internal time clock and communication parameters
in the operator terminal. All the settings has to made for the
operator terminal to work properly.
Use
the value of the field.
Copy
Copies application data to another CP420.
Set
Calibrates the touch panel and adjusts LCD contrast.
See also section
Run
Runs the application.
16
,
,
and
to move to desired field; + and - to set
6.5 Touch Screen
Function
Calibration.
ABB, 1SBC159102M0202
Advertisement
Table of Contents
