Electrolux EFP 4200 Manual page 40

g
of experience and knowledge,
unless they have been given
supervision or instruction concern-
ing use of the appliance by a per-
son responsible for their safety.
• Never leave the appliance unat-
tended when on and supervise
particularly carefully if young
children are around!
• Children should be supervised to
ensure that they do not play with
the appliance.
To be noted when using the
food processor
• Never put the appliance into use
when the hands are wet.
• No paints (lacquer, polyester, etc.)
must be stirred with the appliance
– Explosion danger!
• Switch the appliance off and with-
draw the mains plug each time
before cleaning and maintenance.
• Never dip the motor casing (fig.
1/A) in water or other liquids.
• The manufacturer accepts no lia-
bility for possible damage caused
by improper or incorrect use.
• The tools must only be inserted or
removed from the appliance when
it is disconnected from the mains
supply.
• Caution: The metal blade
(fig. 1/Q) is extremely sharp!
Danger of injury! The metal blade
should only be held by the handle
and only stored with the blade pro-
tector fitted! Caution when rinsing!
• Caution: The cutting inserts
(fig. 9) are very sharp! Danger of
injury! Keep the inserts only in the
accessories compartment pro-
vided (fig. 1/K). Caution when rins-
ing!
• Caution: The blade unit of the
mixer (fig. 14/a) is very sharp.
Danger of injury! Care should be
taken when disassembling and
assembling the mixer.
42
www.preciz.hu
• Caution: Never reach with the
fingers in the filling inlet
(fig. 1/F)! Danger of injury!
• Caution: No hard objects (e.g.
spoons) must be placed in the
mixer while running and do not
reach into the mix container with
the hands. Danger of injury!
• The cover should only be removed
when the tools are stationary.
• Do not hold long objects (blade,
wooden spoon, dough scraper or
the like) in the filling inlet. Danger
of injury! Work only with the stop-
per (fig. 1/E) to compress the cut
food.
• Do not fill hot liquids (only cold or
warm) in the mix container or all-
purpose bowl.
• Always place the all-purpose bowl
(fig. 1/G) on the motor casing
before inserting the spindle
(fig. 1/H) and the tools.
• For normal work (stirring light
doughs, etc.) the appliance can be
used for up to 10 minutes without
stopping. It should be allowed to
cool each time following pro-
longed, continuous operation (for
at least 20 minutes after using for
10 minutes without stopping).
When processing very heavy
items, e.g. 1.5 kg dough, the appli-
ance should not be switched on for
longer than 1 minute without stop-
ping.
• Always first remove the tools and
spindle before removing the con-
tents of the bowl.
• Do not exceed the maximum filling
volume.
• Only use the appliance under
supervision. The mains plug
should be withdrawn even when
leaving the room for a short time.
• After finishing work switch off the
appliance and withdraw the mains
plug.