Sanyo MLS-3020U Instruction Manual page 15

PARTS DESCRIPTION AND FUNCTION
Digital indicator lamp Time indicator lamp
Displays the sterilization
temperature and steriliza-
tion time settings alter-
nately when the unit is in
standby status.
Displays the internal
chamber temperature dur-
ing the sterilizing oper-
ation and during the cool-
ing operation after
fininshing of this steriliza-
tion.
Indicator lights a finishing
mark to indicate the com-
pletion of sterilization.
Pressing the TEMP but-
ton makes the indicator to
display the temperature
setting, and pressing the
TIMER button makes it to
display the setting time.
These operations may be
performed on any of the
unit's operating modes.
Door lamp
Light when the door is in
the properly closed posi-
tion.
Timer operation segments
Flashes when the steri-
lization timer is operating.
Heating process indicator lamp
This lamp lights when the
This lamp lights to display temperature in-
digital indicator lamp is
formation and heating process of the
displaying time informa-
chamber.
tion.
When processing cooling the chamber,
this lamp flushes.
TEMP./ TIMER
I HIGH PRESSURE!
DON'T TURN THE HANDLE, IF
THIS DISPLAY IS FLASHING.
LIGHTING UP : STERILIZING
FLASHING COOLING
When the pressure inside the chamber is
high and the temparature inside the cham-
ber is over 98°C, this lamp will be flashing.
MIN
High pressure lamp
14