Features - Kenwood CG-931 Instruction Manual

2. F E A T U R E S
• T h e product is a NTSC [PAL] standard format color
pattern generator which enables switching between
full-field and I.Q.W. [PAL: U.V.W.] insertion, and
offers chrominance and luminance ON/OFF options.
• T h e device can switch between two types of split
color bars.
• S output is provided as standard equipment, and Y +
S and C outputs can also be obtained from the BNC
terminal on the rear panel.
• T h e Y + S and C values of the S output can be varied
individually.
• T h e setup, chrominance, and luminance levels can
be freely set, and a CAL is provided to make the
device convenient for use in operations such as the
adjustment and repair of color television receivers
and the like.
•Through use of red, blue, green, and white rasters,
the device enables purity
investigation and adjustment of white balance.
• T h e device enables raster alignment and investigation
and adjustment of convergences by use of center
cross and dot patterns.
• T h e device enables evaluation of high-voltage sta-
bility via window patterns.
• T h e device is provided with a 75 ohm video output
for video components and all types of TV monitors,
and a 75 ohm RF output for television receivers.
• T o facilitate observation of the various TV receiver
wave forms via oscillosco
4
confirmation, and
vertical and horizontal
synchronizing signals can be obtained.
• T h e device's synchronizing signal includes an equal-
izing pulse, and the device is phase-locked on the
sub-carrier wave frequency.
• In addition to interlaced scanning, the device allows
switchover to sequential scanning mode, thereby
enabling a reduction in striping flicker and simplifying
related investigation and adjustment procedures.
• Remote controllable models are also available which
enable remote switching of all pattern options using
the RT-62 remote controller.