Starting The Programme; Childproof Lock; Adding/Removing Laundry; Changing The Programme - Siemens iQ300 WD14S4 Series Manual

Operating the appliance
en

Starting the programme

Touch and hold A Start/Reload button
for 1~2 seconds, then release the
button. The programme starts and the
appliance door is locked.
The finish-in time is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.

Childproof lock

You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the Spin/Speed and Finish in
buttons for 3 seconds. The symbol E
lights up in the display panel.
E lights up: The childproof lock is
■
activated and CL is flashing.
When the programme ends, End
Note:
is displayed. The door is unlocked. E
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the Spin/Speed and
Finish in buttons until the symbol
E disappears.
40

Adding/removing laundry

After starting the programme (only for
washing), you can add or remove
laundry if necessary.
Touch the A Start/Reload button for
3 sec. The appliance checks whether
reloading is possible.
If the following appears on the display
panel:
The symbol Õ disappears,
■
reloading is possible.
The symbol Õ lights up, reloading is
■
not possible.
To continue the programme, touch the
A Start/Reload button. The
programme continues automatically.
Notes
Do not leave the door open for too
■
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.

Changing the programme

If you have started the wrong
programme by mistake, you can
change the programme as follows:
Swich off the appliance by touching
1.
power On/Off button.
Swich on the appliance by touching
2.
power On/Off button
Select another programme.
3.
Touch the Start/Reload button.
4.