The Drain Hose At The Siphon Is Blocked; Filter In The Water Supply Is Blocked - Siemens iQ300 WD14S4 Series Manual

Refit and screw on the pump cover.
5.
Close the service flap.
6.
To prevent unused detergent
Note:
from flowing straight into the drain
during the next wash: Pour 1 litre of
water into dispenser II and start the
[ Drain programme.
Cleaning and maintenance
The drain hose at the siphon
is blocked
Turn the programme selector to Off.
1.
Pull out the mains plug.
Loosen the hose clamp. Carefully
2.
remove the drain hose; residual
water may leak out.
Clean the drain hose and siphon
3.
connecting piece.
Re-attach the drain hose and secure
4.
the connection point using the hose
clamp.
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
Turn off the water tap.
1.
Select the Cottonsv (activate
2.
G speedPerfect setting)
programme.
Select the A Start/Reload button.
3.
Allow the programme to run for
approx. 40 seconds.
Press the power button to switch the
4.
appliance Off.
Pull out the mains plug.
5.
en
45