Hitachi EUP-B712 Instruction Manual page 19

Attaching the needle guide to the bracket （Example: In the case
3.2.3
of CIVCO Ultra-Pro II™）
1) Place an appropriate amount of gel inside the cover and/or on the
Probe head. (See Fig. 9)
2) Push the lock toward the bracket to secure the lock. Make sure the
needle guide is firmly attached to the bracket. (See Fig. 10)
Lock
Fig. 9 Attaching the needle guide
Lock
Fig. 10 Attaching the needle guide
Needle guide
attachment area
Needle guide
Needle guide
-13- Q1E-EP1412