To Display The Screen Indicators - Display Function - Sony Digital Handycam Digital 8 DCR-TRV240 Operating Instructions Manual

Playing back a tape
To display the screen indicators – Display function
Press DISPLAY on your camcorder or the Remote Commander supplied with your
camcorder. The indicators appear on the screen.
To make the indicators disappear, press DISPLAY again.
About date/time and various settings
Your camcorder automatically records not only pictures on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Use the Remote Commander for this operation.
1 Set the POWER switch to VCR, then playback a tape.
2 Press DATA CODE on the Remote Commander.
The display changes as follows:
date/time t various settings (SteadyShot, exposure, white balance, gain, shutter
speed, aperture value) t no indicator
50
min
JUL 4 2002
12:05:56 PM
[a] Time code/Tape counter
[b] SteadyShot off
[c] Exposure mode
[d] White balance
[e] Gain
[f] Shutter speed
[g] Aperture value
DATA CODE
DISPLAY
Date/time
0:00:23:01
DISPLAY
Various settings
50
0:00:23:01
min
AUTO
60 AWB
F1.6 9dB
[a]
[b]
[c]
[d]
[e]
[f]
[g]
35