Table of Contents
Advertisement
Frame by frame recording
– Frame recording
You can make a recording with a stop-motion animated effect using frame recording.
To create this effect, alternately move the subject a little and make a frame recording.
We recommend that you use a tripod, and operate your camcorder using the Remote
Commander after step 5.
(1) In the standby mode, press MENU to display the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select FRAME REC in
dial.
(3) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(4) Press MENU to make the menu settings disappear.
The FRAME REC indicator appears.
(5) Press START/STOP to start frame recording. Your camcorder makes a
recording for about six frames, and returns to recording standby.
(6) Move the subject, and repeat step 5.
4
MENU
To cancel the frame recording
Perform either of the following:
– Set FRAME REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.
Note
The remaining tape time is not indicated correctly if you use this function continuously.
When using the frame recording function
The last recorded cut is longer than other cuts.
3
CAMERA SET
STBY
FRAME REC
[ MENU ] : END
5
SELFT I MER
D ZOOM
PHOTO REC
16 : 9W I DE
STEADYSHOT
FRAME REC
OFF
I NT. REC
ON
RETURN
, then press the
CAMERA SET
SELFT I MER
D ZOOM
PHOTO REC
16 : 9W I DE
STEADYSHOT
FRAME REC
ON
I NT. REC
RETURN
[ MENU ] : END
57
Advertisement
Table of Contents
