Ec Declaration Of Conformity; Atex - Siemens SCALANCE S615 Operating Instructions Manual

Approvals

10.1 EC declaration of conformity

Note
The test was performed with a device and a connected communications partner that also
meets the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with these
standards, adherence to the corresponding values cannot be guaranteed.
10.1 EC declaration of conformity
The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
Process Automation
DE-76187 Karlsruhe
Germany
You can find the current EU declaration of conformity for these products on the Internet
pages of Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/15326/cert).
The products described in these operating instructions meet the requirements of the
following EC directives:
• ATEX directive 2014/34/EU
Directive of the European Parliament and the Council of 26 February 2014 on the
approximation of the laws of the member states concerning equipment and protective
systems intended for use in potentially explosive atmospheres.
• EMC directive 2014/30/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the
harmonization of the laws of the member states relating to electromagnetic compatibility.
• RoHS directive 2011/65/EU
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in electrical and electronic equipment.
10.1.1

ATEX

ATEX directive (correct usage in potentially explosive atmospheres)
The SIMATIC NET products described in these operating instructions meet the requirements
of the EU directive 2014/34/EU "Equipment and Protective Devices for Use in Potentially
Explosive Atmospheres".
72
Operating Instructions, 10/2022, C79000-G8976-C389-07
SCALANCE S615