Advertisement
Quick Links
Connect Box
CWG.BOX-A, CWG.BOX-NA, CWG.BOX-EU
A6V13605540_en--_b
2022-10-14
The Connect Box is a simple, universal, and open IoT solution to connect and
monitor small and medium-sized buildings
●
Connects equipment from buildings via plug & play: IoT sensors, meters, heating,
air conditioning, air handling systems, building management systems (BMS).
●
Easy and quick to install: Accessible for all. If the building already has a BMS, the
device connects to the main bus as the third party. If there is no BMS, a BMS
network is directly created by the device.
●
Telemetry and controls: Collects data and controls equipment.
●
Smart converter: Unifies various field communication protocols on one device.
●
Web-connected: Automatically connects to the cloud via 3G/4G or ethernet cable.
●
Powerful IoT device: Combines the essential functionality of a gateway, a PLC, a
modem, and an edge device.
Smart Infrastructure
Advertisement
Related Manuals for Siemens Connect Box
Summary of Contents for Siemens Connect Box
- Page 1 Connect Box CWG.BOX-A, CWG.BOX-NA, CWG.BOX-EU The Connect Box is a simple, universal, and open IoT solution to connect and monitor small and medium-sized buildings ● Connects equipment from buildings via plug & play: IoT sensors, meters, heating, air conditioning, air handling systems, building management systems (BMS).
- Page 2 IoT Platform in the back-end and the user console as a central interface to activate, manage, and configure the device. With the Connect Box cloud license, data can either be sent to a server by API Restful or MQTT (connection with LAN or 4G, SIM card is provided and pre-mounted), or be converted locally to BACnet IP or Modbus IP.
- Page 3 With the Connect Box on-premise license, data can either be sent to a server by MQTT (default connection via IP / LAN) or be converted to BACnet IP or Modbus IP. Configuration, pairing of equipment, and selection of properties are carried out remotely on our web platform (console of configuration) thanks to a provided 4G SIM card used only for configuration.
- Page 4 Technical documentation of equipment ● Technical documentation of IoT sensors ● Diagram of the communication network(s) of the BMS The optional hardware cannot be ordered through Siemens. Technical and mechanical design GSM antenna LoRaWAN antenna Plug-in terminal block with screw terminals...
-
Page 5: Led Displays
Connected power supply is not compatible. To avoid damage, change the power supply. Product documentation Related documents such as the environmental declarations, CE declarations, etc., can be downloaded from the following Internet address: www.siemens.com/bt/download Notes Safety CAUTION National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage. - Page 6 Mounting The Connect Box can be snapped onto standard rails or screwed onto the wall. Plug-in screw terminals connect power and interfaces. Do not install the device in the following locations: ● Where there is excessive moisture, corrosive fumes, or explosive vapors.
-
Page 7: Technical Data
Power supply (not provided) Input AC 85-264 V Output DC 24 V ±10 %, min. 2 A Cable between power supply and Connect Box 2 wires (red, black) 22 AWG , minimum section: 0.35 mm Internal protection Protection against overvoltage, undervoltage, and overcurrent from the power supply with indication by LED: green LED when the power supply is compatible, red LED if it is not suitable. - Page 8 Cellular interface Interface type Cellular 2G / 3G / 4G Supported standards GSM850 33dBm EGSM900 33dBm Frequency band and antenna gain DCS1800 30dBm Maximum radio-frequency power PCS1900 30dBm GSM850 (8-PSK) 27dBm EGSM900 (8-PSK) 27dBm DCS1800 (8-PSK) 26dBm PCS1900 (8-PSK) 26dBm WCDMA B1-2-5-8 24dBm LTE-FDD B1-3-4-5-7-8-12-13-18-19-20-26-38-40-41 23dBm...
- Page 9 LoRaWAN interface Interface type Long range wide area network (LoRaWAN) 1.0 Supported standards LoRa 868 or 915 From 863 to 870 MHz 3.56dBi or Frequency band and antenna gain 902 to 928 MHz 4.51 dBi Maximum radio-frequency power Tx power up to 27dBm Rx sensitivity -139dBm@SF12, BW 125 kHz Asia - AS_923_1 All SF5 to SF12...
- Page 10 CAN ICES-003 FCC ID: 2A2KQ-WSGW1 Environmental compatibility The product environmental declaration contains data on environmentally compatible product design and assessments (RoHS compliance, materials composition, packaging, environmental benefit, disposal). Documents can be downloaded at http://siemens.com/bt/download. Smart Infrastructure A6V13605540_en--_b Smart Infrastructure 2022-10-14...
- Page 11 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The cellular antenna delivered by Siemens meets the FCC-IC regulations. If the installer makes the choice to use another antenna, it must follow the specifications listed below for the device used to comply with FCC/IC regulations limiting both maximum RF output power and human exposure to RF radiation.
- Page 12 This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. The LoRaWAN antenna delivered by Siemens meets the FCC-IC regulations. If the installer makes the choice to use another antenna, the maximum antenna gain allowed is 5.8 dBi to comply with FCC/IC regulations limiting both maximum RF output power and human exposure to RF radiation.
- Page 13 Weight without/with packaging 350 g - 385 g with antenna Warranty Technical data on specific applications are valid only together with Siemens products listed under "Equipment combinations". Siemens rejects any and all warranties in the event that third-party products are used.
- Page 14 KNX interface Power 12-24 VDC power input Dimensions All dimensions in mm and inches. Issued by © Siemens Switzerland Ltd, 2022 Siemens Switzerland Ltd Technical specifications and availability subject to change without notice. Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies...