Advertisement
5
Install OPS on the rear of the display. (Before installing or uninstalling the
OPS, ensure that the display is powered off. Otherwise, the OPS may be
abnormal.)
Different OPS models differ slightly in appearance and screw positions, but the
installation method is the same. This document uses one OPS model as an example.
a
Remove the OPS cover.
6
Install two gourd-shaped mounting pegs and two supporting screws on the
rear of the display, and ensure that they are tightened correctly.
When installing the display, place the display vertically on the foam or cushion.
×2
a
Quickly
screw pegs
and screws.
b
Finally,
tighten
them.
×2
Insert the OPS, with its fan
b
installed outwards.
1
2
Advertisement
