Advertisement
4
Configuring the Device
Upon first power-on of the device, follow instructions on the touchscreen UI to
configure the device.
By default, no password is required for accessing the Advanced screen. After the endpoint is
started for the first time or restored to factory settings, choose Settings > Advanced > Admin
Password in the lower right corner of the home page on the touchscreen to configure a
password.
5
Connecting to More Devices
The large screen supports the connection of multiple types of interfaces to other
devices. For details, see the following figure.
Connecting to the network
Connecting to a presentation source
Connecting to a USB device
Netwok
port
PC
USB flash
drive
Advertisement
