Advertisement
TM
2.1 Product Feature
Category
Level1
All lock (Child lock)
Lock
function
Individual lock
Weekly schedule
Annual schedule
Holyday setting
Schedule &
Timer
Daily timer
Timer
Air flow setting
Function setting
Human
Detection
function
Installer setting
4 _
Wired remote controller
HVAC Solution
Level2
-
On/Off lock
Mode lock
Set temp. range lock
-
-
-
On timer
Off timer
Simple timer
Sleep timer
Human detected indirect wind
Human detected direct wind
Airflow based on activity
Airflow for frequently used
areas
Saving operation
1) OFF
2) On-Off power
saving
3) Temperature
control
4) Energy-saving
Human detection mode
operation based
on activity
Wind direction
1) OFF
2) Direct
3) Indirect
Installation status
Sensing Period
Sensitivity
Temperature
Human detection sensor
control option
Detection areas
setting
Level3
-
It locks all button operation of the remote controller.
-
It locks the On/Off button operation of the remote controller.
-
This function makes it impossible to change the operation mode from the wired remote control.
-
It is the function that can limit the range of the desired temperature
-
You can set up a weekly schedule.
-
You can set an annual schedule.
When the air conditioner is turned on at the set holiday, it is automatically turned off at
every hour.
In case of PREMTB001/PREMTBB01, You can set holidays based on the day of the week.
-
(Max 6 EA)
- For PREMTB100/PREMTBB10, You can set holidays by date.(Max 10 EA)
- For PREMTA(B/C)000, You can set holidays by date.(Max 20 EA)
You can turn on the air conditioner at certain times of the day.
-
- It is executed only once and is deactivated.
You can turn off air conditioning at certain times of the day.
-
- It is executed only once and is deactivated.
-
After 1 to 7 hours of operation, the product can be turned on or off.
-
After 1 to 7 hours of operation, the product can be turned on.
The vanes are controlled so that airflow does not go directly to the occupants according to
-
the occupant's position.
-
Vane control for direct wind control is performed according to the occupant position.
A vision sensor is used to detect the amount of activity in each zone and provide a cus-
-
tomized airflow.
It provides cooling/heating airflow around the living area where the occupants are located
-
by using the Vision sensor.
<Saving operation>
1) OFF : Not use the Human detection mode.
2) On-off power saving : If it is not detected for setting time, the product is turned off for
power saving.
3) Temperature control : If it is not detected for setting time, the product controls the desired
room temperature for power saving.
4) Energy-saving operation based on activity
Energy can be saved by controlling the set temperature based on the amount of activity.
<Wind direction>
1) OFF :Do not use human detection wind direction control.
2) Direct : Direct wind operation based on human detection.
3) Indirect Indirect wind operation based on human detection.
Set the installation status & direction of human detection sensor.
*Not installed / basic installation / 90º rotation installation
Set the detection period of the 'human detection sensor'.
*5 s (*Not recommend) / 30 s(Default) / 1 min. / 3 min.
Set the sensitivity of the sensor.
*Standard / Low sensitivity / High sensitivity
This function selects whether to keep the operation state after the temperature saving oper-
ation is completed.
1) Step0 : Operation is maintained when temperature power saving is completed.
2) Step1 : Operation is stopped when temperature power saving is completed.
12x6 (Default)
6x6 : Reduce the area in square mode to use the human body detection function.
Indoor floor area detection : This is a function to reduce the possibility of false detection due
to a narrow space or a person outside the windshield.
When the indoor floor area detection mode is used, only the
human body in the floor area detected by the floor area detec-
tion algorithm is selectively determined as a person.
DESCRIPTION
Advertisement
